LED Lights on Controller

Understanding what each LED light means on the controller of the band will help users know what state their bands are in and if they are ready for use.

Know what the controller includes:

The controller includes the On/Off power button, LED indicators, and a rechargeable battery.

The On/Off power-button is located in the center of the controller case.

• The INVU Sensor Band is powered ON by a short press on the power button and powered OFF by a long press (longer than two seconds) on the power button.

WARNING: Do not press the power button for more than 6 seconds as it could switch to a nonoperational mode, which will not allow the INVU Sensor Band to work.

The controller has two LED indicators:

• The Functional LED indicator: 3-colored LED, integrated into the ON/OFF power button, that is visible from the top and side of the controller.

• The Battery Charging LED indicator: 2-colored LED, adjacent to the charging port.

When is power if OFF, the LED indicators are turned off and only when charging will the LED indicators next to the charging port will turn orange or green when fully charged.

When the power is ON, the LED colors and state will indicate the status of the INVU Sensor Band.

See below for what each color and behavior of the LED lights mean:

The INVU Sensor Band will take around 2 hours to fully charge from an empty battery and will typically last around 4.5 hours of continuous monitoring.

Note: The INVU Sensor Band battery is pre-charged before shipping. However, it is recommended that users recharge the band to full battery capacity before the first use.