Making sure your INVU Sensor Band is fully charged before every monitoring session is an important piece to have a successful monitoring session.
Warning: Remove the INVU Sensor Band from your body before connecting the cable for charging! Do NOT charge the battery while the INVU Sensor Band is worn.
Caution: Do not use any other charging cable or a power supply other than the one
supplied in the INVU Sensor Band package!
To start charging your INVU Sensor Band:
1. Power OFF the INVU Sensor Band.
The Sensor Band battery can ONLY be charged if the power is turned off. Attempting to charge the Sensor Band when it is powered ON will automatically power it OFF.
2. Remove the band from your body before charging.
3. Insert the USB type-C plug of the supplied power supply to the Micro USB charging socket at the side of the plastic controller.
The minimum charging capacity to start a monitoring session is approximately 20%,
which is equivalent to about 45 minutes of monitoring.
The band battery status (charging capacity) is displayed on the INVU App Home screen.
4. When charging is complete, disconnect the USB type-C plug from the Controller.
Note: When the LED turns green, it is an indication that the INVU Sensor Band is fully charged.
Note: INVU by Nuvo will not function if the battery is depleted. If the INVU Sensor
Band battery does not charge, contact Nuvo customer support.
For more information about what the different LED lights indicate, check out the article below: